Riser

More compliance, more comfort and more World Cup proven performance. Our updated oval profile makes the V2 Bar more compliant than any other 35mm diameter handlebar and up to 33% more compliant than our renowned V1 Carbon Bar. The new dedicated 760mm bar is optimized for narrower widths and the introduction of a 50mm rise in the 800mm gives more riders, more options. With 5 different configurations of width and rise, there’s a bar to fit every rider’s needs, across all disciplines

Deity Speedway Handlebars: at 810mm wide with a 30mm rise, this 35mm bore handlebar is impressively responsive and comfortable at the same time. Designed for the sweet spot that absorbs maximum vibration, chatter and impact while maintaining the stiff reactive feeling that allows you to dance on the edge of catastrophe, ever increasing your need for speed.

- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9 degree backsweep and 5 degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength to weight ratio - Base Handlebar uses 6061 aluminum

A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9-degree backsweep and 5-degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength-to-weight ratio - Base Handlebar uses 6061 aluminum

The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9

TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface. - Upsweep: 5° - Backsweep: 9° (760mm bars) - Backsweep: 7° (all other bars)

Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendant geometry from TruVativ's best enduro rider’s input - Backsweep: 7° - Upsweep: 5°

You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black

Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Al-7050 - Width: 760mm - Backsweep: 7-degrees - Rise: 20mm - Upsweep: 5-degrees - Colors: Black

Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair. - Includes Rockshox sticker pack to give fork and handlebar a unified custom look - Stiff, precise and wide - Signature Troy Lee Designs style - Geometry and 7050 aluminum are designed for DH and gravity events - Back Sweep (deg): 9 - Upsweep: 5 - Weight: 349g - Material: Aluminum

TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.

TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.

- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g (15) / ±275g (25) - Diameter (mm): 31,8 - Rise (mm): 15 / 25 - Length (mm): 780 - Geometry (deg°): 5° up x 7° back - Finish: Shot peen anodized, decal logos

- DH and Freeride, ultra-wide, 820mm wide handlebar - Big and burly 35mm barclamp with increased strength and stiffness compared to conventional 35mm alloy bars - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Weight optimized and adjustable to 760mm Features: - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design - Material: Zirconium Doped 7-Series Alloy - Weight: ±300g - Diameter: 35mm - Rise: 25mm - Length: 820mm - Geometry: 5° up x 8° back - Finish: Shot peen anodized, decal logos

World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos

- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm Features - Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - Material: MGR Super 6 Alloy - Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm) - Sweep: 4° up x 8° back - Finish: Shot peen anodized, decal logos

Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike

- Freeride inspired all mountain suitable geometry makes the bar extremely versatile - Rock solid in the park or on the trail - Cost effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life even further - Material: Alloy - Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm) - Diameter (mm): 31.8 - Rise (mm):25 / 40 / 60 - Length (mm): 785 - Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm) - Finish: Shotpeen anodized, laser logos

Fast, Light, and Agile. SQlab ergonomics experts are not only quite impressive in just ergonomics, but also very well versed in high-tech, material science and carbon manufacturing. Ergonomics: With an aggressive sitting position and a handlebar width from 740mm and under 9° backsweep, the wrists are always overstretched. SQlab currently has the monopoly for aggressive MTB handlebars. Damping: The 311 FL-X has been developed with regard to flex behavior. In an elaborate study, we were able to prove that almost all high-quality handlebars have damping characteristics between 0% and 15%, depending on the intensity. The 311 FL-X is between 20% and 30%. The higher flex has no disadvantages in steering precision. The steering forces are clearly below the vertical forces. Stability: SQlab is one of only two manufacturers to remain in the big bike magazine break test without damage. - Weight: At 200g, the handlebar is one of the lightest and most stable on the market. - Area of use: MTB Race - The 12° backsweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain - The 15mm or 30mm Rise (handlebar height) allows an individual adjustment of the sitting position. - This bar utilizes a 31.8mm clamping area. If you have a 35mm stem, please refer to our shim kit.

The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable, as well as the lightest, bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 12° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more upright riding position, thus protecting the wrist from the extreme strain of downhill riding. The 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - Use: MTB, Gravity & E-Performance - 15mm, 30mm or 45mm rise options allow individualized positions - 31.8 clamp diameter

The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 12° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more upright riding position, thus protecting the wrist from the extreme strain of downhill riding. The 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - Use: MTB, Gravity & E-Performance - 15mm, 30mm or 45mm rise options allow individualized positions - 31.8 clamp diameter

The perfect combination of form, wall thickness and diameter with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 16° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more stretched riding position, while the 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - 15mm, 30mm or 45mm rise allow individualized positions - 31.8 clamp diameter

The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 16° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more stretched riding position and the 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - 15mm, 30mm or 45mm rise allow individualized positions - 31.8 clamp diameter

Fast, light, sporty and agile. Who would have thought that the SQlab ergonomics experts are also quite good in high-tech, material science and carbon manufacturing. - Stability: Syntace and SQlab are the only manufacturers to remain in the big bike magazine break test without damage. - Weight: At 200g, the handlebar is one of the lightest and most stable on the market. - Ergonomics: With a sporty sitting position and a handlebar width from 740mm and under 9° backsweep, the wrists are always overstretched. SQlab currently has the monopoly for sporty MTB handlebars. - Damping: The 311 FL-X has been developed with regard to flex behavior. In an elaborate study we were able to prove that almost all high-quality handlebars have damping characteristics between 0% and 15%, depending on the intensity. The 311 FL-X is between 20% and 30%. The higher flex has no disadvantages in steering precision. The steering forces are clearly below the vertical forces. - Area of use: Marathon, Cross Country and Trail bikes with sporty sitting position and under 130mm suspension. The pictured stem is not included in the scope of delivery. The 15mm or 30mm Rise (handlebar height) allows an individual adjustment of the sitting position. - Area of use: MTB race - Width: 740mm - Shortened maximum width: 720mm - Backsweep: 16° - Upsweep: 4° - Material: carbon - Clamping: 31.8mm - Downsweep: 0° - Stretch: 0mm

- Handlebar optimized for 19mm diameter bar ends - Exclusively fits smaller grips for optimal ergonomics. - 650mm Bar - Offers ample width for increased bar control. - 6061 Sand Blasted Aluminum - Requires 22.2 Shim Kit (170915-01) - Rise: 20mm - Handlebar Width: 650mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Handlebar Weight: 260g

Answering a call from the wild and satisfying the style-conscious among us, the new Classic Kyote is the latest offering from Ritchey for adventure riding and bikepacking. Featuring a super-comfortable 27.5-degree sweep and 35mm rise, the Kyote bar is perfect for skirting ridge lines, cutting trails, and exploring near and far. With a plentiful 800mm width, there's lots of space for bags, lights, and navigation, while the Kyote's rise and sweep offer a natural hand position for comfort and control—even when loaded with gear. Featuring the timeless high-polish silver finish, the Kyote represents Ritchey's deep heritage with handlebar design and a never-ending quest for adventure. Embrace the Kyote, and chase the ultimate adventure experience. - Designed for adventure and bikepacking - Classic high-polish silver finish - 800mm wide for control and plenty of space for bags, lights, etc. - Material: double-butted 6061 alloy - Width: 800mm - Rise: 35mm flat rise - Backsweep: 27.5° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 360g

The Ritchey Classic Rizer handlebars are a refined version of its high-performance predecessors featuring a classy high-polish silver finish.

- The Comp Buzzard features a 70mm flat rise - Offers a more upright riding position for comfort when touring or bikepacking ‚ especially on bikes with a lower stack height - 820mm wide and a 27.5-degree backsweep offer plenty of control\n- Bar end compatible - Double-butted 6061 alloy - 376g

The standard for which Ritchey performance is based on. Race-worthy components priced for the casual cyclist. - Gentle sweep for ergonomic performance - Bar Clamp Diameter: 31.8mm - Width: 740mm - Back Sweep: 9 degrees - Weight: 380g - Material: Alloy

Riding trails since the 1970s and having his name emblazoned on the first production mountain bikes, it’s safe to say that Tom Ritchey knows a thing or two about designing mountain bike components that meet the demands of MTB riders everywhere. The new Ritchey Comp Trail Rizer 35 bar brings Tom’s decades of riding experience and component design to modern mountain bikers looking to complete their latest build with reliable and legendary parts. With an 800mm width and 15mm rise, the Comp Trail Rizer 35 handlebar features a 9° backsweep and a 4° upsweep – a sweet spot of measurements for a natural, comfortable, and confident hand position. This burly bar is made from double-butted 6061-T6 alloy and is perfectly suited to slice through the thrashing you’re sure to throw at it.